NSN 5985-01-039-8439
Toggle Attenuator
Transmission line application design, coaxial type body style, -20.0/+125.0 degrees celsius operating tempurature range, voltage standing wave ratio: 1.20 and 1.00.
Manufacturer part number 50V100-028 for national stock number 5985010398439.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-039-8439.
-
MPN or Model
50V100-028
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
1 lb -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
3.810 inches -
Overall Height
2.200 inches -
Overall Width
1.880 inches -
Shaft Diameter
0.250 inches -
Shaft Length
0.750 inches -
Operating Tempurature Range
-20.0/+125.0 degrees celsius -
Voltage Standing Wave Ratio
1.20 and 1.00 -
Coaxial Connector Series Designation
Sma -
Power Rating
0.5 watts average -
Insertion Loss At Minimum Attenuation In Maximum Decibels
0.4 -
Overall Attenuation Range In Decibels
+0.0/+100.0 -
Attenuation Variation Method
Stepped -
Step Position Quantity
10 -
Attenuation Per Step In Decibels
10.0 -
Frequency Range
Between 1250.000 megahertz and 1350.000 megahertz -
Overall Attenuation Accuracy In Decibels
-0.80/+0.80 -
Adjustment Device Type And Quantity
1 shaft -
Shaft Type
Round -
Terminal Type And Quantity
2 connector, coaxial, female
More from these suppliers
- 5985-00-433-3945 MPN MDC95090A-90Electrical Dummy Load
- 5985-01-152-5133 MPN MDC89218A-10Fixed Attenuator
- 5935-01-248-8406 MPN TF-TFConnector Adapter
- 5985-01-032-5452 MPN MDC1012-15Fixed Attenuator
- 5985-01-155-1375 MPN 50CAL25-1500Variable Attenuator
- 5985-01-548-2098 MPN 50SDV19-2173Variable Attenuator
- 5945-00-044-5789 MPN 577R620H09Solid State Relay
- 5985-00-114-1811 MPN 509R880G01Waveguide Assembly
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-039-8439 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
50V100-028 | Racon Corp |
50V100-028 | Alan Industries Inc |
142C711H01 | Northrop Grumman Systems Corporation |
50V100W | Alan Industries Inc |
MDC2017SA-64 | Dal-tech Devices, Inc. |