NSN 5306-00-205-3701
Close Tolerance Hex Head Bolt
Between 2.078 inches and 2.125 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN175H20A for national stock number 5306002053701.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-205-3701.
-
MPN or Model
AN175H20A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.579 inches -
Fastener Length
Between 2.078 inches and 2.125 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.546 inches and 1.578 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-174-0760 MPN AN515DD416-7Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-205-3701 close tolerance boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| AN175H20A | Air Force-navy Aeronautical |
| AN175H20A | Air Force-navy Aeronautical |
| AN175H20A | Air Force-navy Aeronautical |
| AN175H20A | Air Force-navy Aeronautical |
| AN175H20A | Air Force-navy Aeronautical |
| AN175H20A | Air Force-navy Aeronautical |
| AN175H20A | Air Force-navy Aeronautical |
| AN175H20A | Air Force-navy Aeronautical |
| AN175H20A | Air Force-navy Aeronautical |
| AN175H20A | Air Force-navy Aeronautical |
Stock Check
