NSN 5306-00-484-3327
Close Tolerance Hex Head Bolt
Between 1.398 inches and 1.445 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BM17028-5-17 for national stock number 5306004843327.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-484-3327.
-
MPN or Model
BM17028-5-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.326 inches and 0.393 inches -
Fastener Length
Between 1.398 inches and 1.445 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.274 inches first hole and 1.331 inches first hole -
Material
Steel -
Material Specification
23-105 fscm 76301 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mac ps13145 fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf -
Specification Data
76301-st3-561 manufacturers standard
More from these suppliers
- 5305-00-927-7898 MPN A1C82-3-15Machine Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-054-6235 MPN C9535-6-17Close Tolerance Screw
- 5305-01-075-0958 MPN NAS1102-06-7BMachine Screw
- 5305-01-124-5766 MPN AIC812-04-20Machine Screw
- 5305-01-284-7158 MPN AIC985-5-22PClose Tolerance Screw
- 5305-01-303-5634 MPN 3M1034C4-10-21Close Tolerance Screw
- 5305-01-321-2392 MPN AIC811-02-10Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-484-3327 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM17028-5-17 | Huck International, Inc. |
73992-5D17 | Sps Technologies, Llc |
MB13-5D17 | Hi-shear Corporation |
AIC220-5D17 | Sps Technologies, Llc |
MB13-5D17 | Lisi Aerospace Canada Corp |
MB13-5D17 | Alcoa Fastening Systems |
ST3M561-5D17 | Wesco Aircraft Hardware Corp. |
ST3M561-5D17 | Brys Instrument Corp |
AIC220-5D17 | Boeing Company, The |
MB13-5D17 | Satair A/s |
ST3M561-5D17 | Boeing Company, The |
73992-5D17 | Sps Technologies Inc |
BM17028-5-17 | Huck Intl Inc |
A1C220-5D17 | Sps Technologies, Llc |