NSN 5306-00-486-1543
Coaxial Connector
Between 1.887 inches and 1.917 inches fastener length, double hexagon w/hole head style, 0.673 inches head height, width between flats: between 0.803 inches and 0.814 inches .
Manufacturer part number AIC260E10H12 for national stock number 5306004861543.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-486-1543.
-
MPN or Model
AIC260E10H12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.127 inches and 1.177 inches -
Fastener Length
Between 1.887 inches and 1.917 inches -
Head Style
Double hexagon w/hole -
Head Height
0.673 inches -
Width Between Flats
Between 0.803 inches and 0.814 inches -
Extended Washer Diameter
Between 1.185 inches and 1.195 inches -
Extended Washer Thickness
0.125 inches -
Hole Diameter
0.055 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Hole Configuration Style
Round longitudinal hole -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response or ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837 type 1 class 2 military specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
56878-ewb26 manufacturers standard
More from these suppliers
- 5305-00-054-4973 MPN 51B234-3Socket Head Cap Screw
- 5305-00-478-0349 MPN AIC1181-5Close Tolerance Screw
- 5305-00-724-7845 MPN AIC813-4-R6Machine Screw
- 5305-01-030-2904 MPN AIC813-08R7Machine Screw
- 5305-01-264-1475 MPN LD111-0044-0715Close Tolerance Screw
- 5305-01-348-7811 MPN AIC1651-4-32PClose Tolerance Screw
- 5305-01-381-2331 MPN AIC812-3-14Machine Screw
- 5305-01-396-5233 MPN AIC618-3-10Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-486-1543 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC260E10H12 | Sps Technologies, Llc |
EWB26-10H12 | Sps Technologies, Llc |
VS2005-10H12 | Arconic Global Fasteners & Rings, |
C305-10H12 | Sps Technologies, Llc |
C305-10H12 | Sps Technologies, Llc |
C305-10H12 | Lockheed Martin Corporation |
EWB26-10H12 | Sps Technologies, Llc |
VS2005-10H12 | Alcoa Global Fasteners, Inc. |
Stock Check
- NE: 7