NSN 5306-00-801-6761
Coaxial Connector
Between 1.483 inches and 1.544 inches fastener length, hexagon head style, between 0.120 inches and 0.140 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 51B464-4A19 for national stock number 5306008016761.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-801-6761.
-
MPN or Model
51B464-4A19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.483 inches and 1.544 inches -
Head Style
Hexagon -
Head Height
Between 0.120 inches and 0.140 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-8503 military specification 4th material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-419-5950 MPN 14-41628-1Bell Crank
- 1560-00-558-2158 MPN RK0196Wing Parts Kit
- 1560-01-077-4136 MPN RK0345BIntake Duct Skin Repair Package
- 1560-01-515-6650 MPN 3-32350-1Horizontal Stabilizer
- 1560-01-212-8996 MPN 14-12392-55Aircraft Former
- 1680-01-418-1613 MPN 14-73903-7Aircraft Controller Grip Assembly
- 5305-00-492-3007 MPN DFP79S10B5Special Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-801-6761 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B464-4A19 | Northrop Grumman Technical Services, |
51B464-4A19 | Northrop Grumman Systems Corporation |
51B464-4A19 | Huck International, Inc. |
51B464-4A19 | Huck Intl Inc |