NSN 5306-00-801-8687
Wheel Bolt
3.625 inches fastener length, hexagon head style, between 0.531 inches and 0.563 inches head height, width between flats: between 0.285 inches and 0.312 inches .
Manufacturer part number 90444-729 for national stock number 5306008018687.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-801-8687.
-
MPN or Model
90444-729
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.375 inches -
Fastener Length
3.625 inches -
Head Style
Hexagon -
Head Height
Between 0.531 inches and 0.563 inches -
Width Between Flats
Between 0.285 inches and 0.312 inches -
Thread Diameter
0.875 inches -
Grip Length
2.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
9 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758 military specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-086-8020 MPN 513043-20-27PWElectrical Plug Connector
- 4820-00-245-7699 MPN 520203-3Angle Valve
- 5905-00-493-6060 MPN 412299-62Noninductive Wire Wound Fixed Resistor
- 5925-01-304-0871 MPN 5SE01330-10Circuit Breaker Box
- 5305-00-167-3932 MPN 1175-3-4Machine Screw
- 5305-01-062-2181 MPN 515646-4Machine Screw
- 5306-00-576-1324 MPN 87751-920Machine Bolt
- 5306-01-512-0080 MPN 627200 FIND 5Shoulder Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-801-8687 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
90444-729 | Naval Air Warfare Center Aircraft |