NSN 5306-00-899-7496
Wheel Bolt
Between 3.985 inches and 4.015 inches fastener length, hexagon head style, between 0.266 inches and 0.296 inches head height, width between flats: between 0.492 inches and 0.501 inches .
Manufacturer part number 688761 for national stock number 5306008997496.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-899-7496.
-
MPN or Model
688761
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 3.705 inches and 3.795 inches -
Fastener Length
Between 3.985 inches and 4.015 inches -
Head Style
Hexagon -
Head Height
Between 0.266 inches and 0.296 inches -
Width Between Flats
Between 0.492 inches and 0.501 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.220 inches and 0.280 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
35.0 rockwell c and 40.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Surface Finish
125.0 microinches -
Material
Steel comp 410 or steel comp 416 -
Material Specification
Aisi assn standard all material responses -
Thread Series Designator
Unf
More from these suppliers
- 4920-01-166-7234 MPN 738161Interface Device Panel
- 5930-01-178-0815 MPN 697902Pressur Switch Assy
- 4820-01-225-0950 MPN EX5007-21Safety Relief Valve
- 1560-01-478-1970 MPN 764698Aircraft Access Cover
- 4920-01-493-8021 MPN EP5648-11-50Aircraft Engine Test Stand
- 1680-01-576-6654 MPN 766542AAircraft Gearbox Assembly
- 5950-01-254-2859 MPN 21488-1Electrical Coil
- 1680-01-381-3592 MPN 748951BRemote Control Lever
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-899-7496 machine boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| 688761 | Hamilton Sundstrand Corporation |
Stock Check
