NSN 5306-00-980-2800
Coaxial Connector
1.406 inches fastener length, 0.281 inches head height, between 0.305 inches and 0.315 inches width between flats, extended washer diameter: 0.500 inches .
Manufacturer part number 50832-507-7 for national stock number 5306009802800.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-980-2800.
-
MPN or Model
50832-507-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.376 inches and 0.381 inches -
Fastener Length
1.406 inches -
Head Height
0.281 inches -
Width Between Flats
Between 0.305 inches and 0.315 inches -
Extended Washer Diameter
0.500 inches -
Extended Washer Thickness
0.090 inches -
Grip Diameter
Between 0.3116 inches and 0.3118 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.025 inches and 1.030 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
190000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams5643 cond 17-4ph assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-227-7015 MPN 443-1546-050Composition Fixed Resistor
- 5905-00-460-1074 MPN 443-0969-356Film Fixed Resistor
- 4920-00-738-5586 MPN 21003-890Modification Kitxra
- 5905-00-808-7230 MPN 443-0004-099Film Fixed Resistor
- 5935-00-828-3321 MPN 414-1458-001Electrical Plug Connector
- 5940-00-836-3543 MPN 621X5Feedthru Terminal
- 5905-00-840-4690 MPN 443-0153-078Composition Fixed Resistor
- 4920-00-859-6428 MPN 40823-305-21Electronic Counter
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-980-2800 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
50832-507-7 | Boeing Company, The |