NSN 5306-01-057-8130
Coaxial Connector
Between 1.245 inches and 1.275 inches fastener length, spline extended washer head style, between 0.240 inches and 0.260 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number MS21297-0412 for national stock number 5306010578130.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-057-8130.
-
MPN or Model
MS21297-0412
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.485 inches and 0.535 inches -
Fastener Length
Between 1.245 inches and 1.275 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-207-9349 MPN BACB30NN3K5Close Tolerance Screw
- 5306-00-223-3138 MPN 2-141-249-03Turbine Vane Bolt
- 5306-00-291-5242 MPN ST3M453-7-11Close Tolerance Bolt
- 5306-00-467-0871 MPN J644P10AMachine Bolt
- 5306-01-163-0587 MPN VCG0001-4-7Close Tolerance Bolt
- 5306-01-229-0200 MPN BACB30LU6-14Bolt
- 5306-01-331-5787 MPN VAL23001-5D017Shear Bolt
- 5306-01-337-5960 MPN BACB30UU8-20Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-057-8130 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-0412 | Sps Technologies, Llc |
MS21297-0412 | Sps Technologies, Llc |
VFK101G4-012 | Valley-todeco, Inc. |
MS21297-0412 | National Aerospace Standards |
MS21297-0412 | Huck International, Inc. |
MS21297-0412 | Military Standards |
MS21297-0412 | Huck Intl Inc |