NSN 5306-01-060-6842
Close Tolerance Hex Head Bolt
Dry film lube per mil-l-8937b on bearing surface of head and grip.
Manufacturer part number PBF7521-6DN22 for national stock number 5306010606842.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-060-6842.
-
MPN or Model
PBF7521-6DN22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
Between 1.694 inches and 1.714 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Head Minor Diameter
0.679 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.482 inches first hole and 1.502 inches first hole -
Material
Stainless steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium top of head -
Surface Treatment Specification
Nas672 national specification single treatment response top of head -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-084-6318 MPN LS15263V3-7Machine Screw
- 5305-01-167-1089 MPN BACB30LR4-8Close Tolerance Screw
- 5305-01-435-3316 MPN BACB30LU7-14Close Tolerance Screw
- 5305-01-435-6614 MPN BACB30LU9-27Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5306-00-149-8993 MPN VAL23611-5D010Close Tolerance Bolt
- 5306-00-960-5455 MPN BACB30LJ4DU15Close Tolerance Bolt
- 5306-01-004-9474 MPN 327B455P23Machine Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-060-6842 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-6DN22 | Sps Technologies, Llc |
AIC596-6DN22 | Sps Technologies, Llc |
VS3133-6DN22 | Alcoa Global Fasteners, Inc. |
VCG3339-6DN22 | Valley-todeco, Inc. |
VS3133-6DN22 | Arconic Global Fasteners & Rings, |
H411-6DN22 | Huck International, Inc. |
120978-6D22N | Sps Technologies, Llc |
1209786D22N | Sps Technologies, Llc |
C7521-6DN22 | Alcoa Global Fasteners, Inc. |
C7521-6DN22 | Lockheed Martin Corporation |
SF118-6DN22 | Saturn Fasteners Inc |
VS3133-6DN22 | Tactair Fluid Controls, Inc. |