1-321-802-5889

NSN 5306-01-165-5593

Close Tolerance Hex Head Bolt

About this product

Between 1.443 inches and 1.463 inches fastener length, spline drive shear head head style, 0.210 inches head height, grip diameter: between 0.3740 inches and 0.3745 inches .

Manufacturer part number S406-6D17 for national stock number 5306011655593.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-165-5593.

  • MPN or Model

    S406-6D17

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.371 inches and 0.411 inches
  • Fastener Length
    Between 1.443 inches and 1.463 inches
  • Head Style
    Spline drive shear head
  • Head Height
    0.210 inches
  • Grip Diameter
    Between 0.3740 inches and 0.3745 inches
  • Shank Unthreaded Hole Diameter
    0.106 inches first hole and 0.111 inches first hole
  • Head Minor Diameter
    Between 0.578 inches and 0.585 inches
  • Thread Diameter
    0.375 inches
  • Grip Length
    Between 1.052 inches and 1.072 inches
  • Thready Qty Per Inch (tpi)
    24
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.325 inches first hole and 1.355 inches first hole
  • Material
    Steel comp xm-13
  • Material Specification
    Ams5629 assn standard single material response
  • Surface Treatment
    Passivate
  • Surface Treatment Specification
    Qq-p-35 federal specification single treatment response
  • Thread Series Designator
    Unjf
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-165-5593 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306011655593

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
S406-6D17 Huck International, Inc.
VS3174-6D17 Arconic Global Fasteners & Rings,
VCG0001-6D17 Valley-todeco, Inc.
AIC687-6D17 Sps Technologies, Llc
PBF1265-6D17 Sps Technologies, Llc
MB154-6D17 Hi-shear Corporation
122895-6D17 Sps Technologies, Llc
MB154-6D17 Lisi Aerospace Canada Corp
ST3M744-6D17 Boeing Company, The
ST3M744-6D17 Alcoa Global Fasteners, Inc.
S406-6D17 Huck Intl Inc
VS3174-6D17 Alcoa Global Fasteners, Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.