NSN 5306-01-186-8584
Close Tolerance Hex Head Bolt
Between 2.430 inches and 2.450 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.448 inches and 0.455 inches .
Manufacturer part number ST3M744-4-34 for national stock number 5306011868584.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-186-8584.
-
MPN or Model
ST3M744-4-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 2.170 inches and 2.210 inches -
Fastener Length
Between 2.430 inches and 2.450 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.448 inches and 0.455 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-202-8325 MPN BACS12CK3U16Machine Screw
- 5305-01-521-9544 MPN ST3M557-3-16Close Tolerance Screw
- 5305-01-528-8397 MPN 3M1170C4-10AClose Tolerance Screw
- 5306-00-082-6869 MPN VFK100G-08016Shear Bolt
- 5306-00-512-6423 MPN VEP220555-5-14Special Bolt
- 5306-00-903-9676 MPN MS21250-04072Shear Bolt
- 5306-00-969-3161 MPN MS21250-04040Shear Bolt
- 5306-01-045-2869 MPN VAL23608-4-24Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-186-8584 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M744-4-34 | Boeing Company, The |
VS3174-4-34 | Arconic Global Fasteners & Rings, |
S406-4-34 | Huck International, Inc. |
VCG0001-4-34 | Valley-todeco, Inc. |
AIC687-4-34 | Sps Technologies, Llc |
PBF1265-4-34 | Sps Technologies, Llc |
MB154-4-34 | Hi-shear Corporation |
122895-4-34 | Sps Technologies, Llc |
MB154-4-34 | Lisi Aerospace Canada Corp |
ST3M744-4-34 | Heartland Precision Fasteners, Inc. |
ST3M744-4-34 | Fastener Innovation Technology, Inc. |
S406-4-34 | Huck Intl Inc |
10116118 | Nimikkeistokeskus Ncb Finland |
VS3174-4-34 | Alcoa Global Fasteners, Inc. |