NSN 5306-01-294-6339
Coaxial Connector
1.287 inches fastener length, double hexagon head style, 0.300 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number 73142-4HL-14 for national stock number 5306012946339.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-294-6339.
-
MPN or Model
73142-4HL-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.412 inches -
Fastener Length
1.287 inches -
Head Style
Double hexagon -
Head Height
0.300 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Grip Diameter
0.750 inches -
End Application
1520-01-106-9519 -
Thread Diameter
0.190 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-197-5978 MPN 7-317400221-3Pylon Bracket
- 1560-01-241-3338 MPN 7-311C10032-8Pitot Drain Tee
- 1560-01-264-2104 MPN 7-311525064-11Remote Control Lever
- 1560-01-355-4441 MPN 7-311140181-5Aircraft Frame
- 5935-01-469-1884 MPN HS5842ZS1907LElectrical Connector Backshell
- 5935-01-470-4781 MPN HS5703Electrical Plug Connector Body
- 1560-01-472-2251 MPN 7-W11712210-1Bleed Air Duct Assembly
- 5930-01-196-6838 MPN HS4718-AGG0013Push Switch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-294-6339 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
73142-4HL-14 | Sps Technologies, Llc |
AIC4144-4HL14 | Sps Technologies, Llc |
HS4144-4HL14 | Boeing Company, The |
HS4144-4HL14 | Mcdonnell Douglas Helicopter Co Inc |