NSN 5306-01-320-3533
Coaxial Connector
Between 0.496 inches and 0.526 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number PBF7521-3-3 for national stock number 5306013203533.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-320-3533.
-
MPN or Model
PBF7521-3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.496 inches and 0.526 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-140-7286 MPN BACB30LH4-7Close Tolerance Screw
- 5305-01-342-8579 MPN VCL0009-4-11Close Tolerance Screw
- 5305-01-342-8580 MPN VCL0009-4-10Close Tolerance Screw
- 5305-01-342-8580 MPN VLC0009-4-10Close Tolerance Screw
- 5305-01-513-9494 MPN ST3M557-3-10Close Tolerance Screw
- 5306-00-308-3482 MPN J643P05DMachine Bolt
- 5306-00-432-3883 MPN VAL22034-6GS19Shear Bolt
- 5306-00-575-7172 MPN BACB30NE3-8Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-320-3533 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-3-3 | Sps Technologies, Llc |
C7521-3-3 | Lockheed Martin Corporation |
VS3133-3-3 | Arconic Global Fasteners & Rings, |
H411-3-3 | Huck International, Inc. |
C7521-3-3 | Alcoa Global Fasteners, Inc. |
VCG0009-3-3 | Valley-todeco, Inc. |
AIC596-3-3 | Sps Technologies, Llc |
120978-3-3 | Sps Technologies, Llc |
H411-3-3 | Huck Intl Inc |
VS3133-3-3 | Alcoa Global Fasteners, Inc. |