NSN 5306-01-336-8919
Close Tolerance Hex Head Bolt
Between 1.579 inches and 1.609 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number 80994-5-14 for national stock number 5306013368919.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-336-8919.
-
MPN or Model
80994-5-14
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.719 inches -
Fastener Length
Between 1.579 inches and 1.609 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
End Application
C-17 -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-4633 MPN BACB30LU4-25Close Tolerance Screw
- 5305-01-379-9749 MPN 3M927-3L7Close Tolerance Screw
- 5305-01-435-3141 MPN BACB30LU6-23Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-462-2873 MPN 3M1169V5-10AClose Tolerance Screw
- 5306-00-126-5150 MPN BACB30FD7-48Shear Bolt
- 5306-00-131-2529 MPN A15D2299-1Eye Bolt
- 5306-01-045-5554 MPN ST3M507-3-24Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-336-8919 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
80994-5-14 | Sps Technologies, Llc |
VCG0027-5-14 | Valley-todeco, Inc. |
AIC871-5-14 | Sps Technologies, Llc |
SLB265-5-14 | Space-lok, Inc. |
PBF1535-5-14 | Sps Technologies, Llc |
3408-5-14 | Arconic Global Fasteners & Rings, |
3D0013-5-14 | Boeing Company, The |
871-5-14 | Sps Technologies, Llc |
3408-5-14 | Alcoa Global Fasteners, Inc. |