NSN 5306-01-356-2529
Coaxial Connector
1.105 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number SC5060-4-8 for national stock number 5306013562529.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-356-2529.
-
MPN or Model
SC5060-4-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.605 inches -
Fastener Length
1.105 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches fastener -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-4637 MPN BACB30LK3-3Close Tolerance Screw
- 5305-01-365-0409 MPN BACB30LR6-43Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-541-6036 MPN 3M927-5L9Close Tolerance Screw
- 5306-00-074-2701 MPN VFK100G-05012Shear Bolt
- 5306-00-144-8005 MPN 3021T34P01Machine Bolt
- 5306-00-205-3700 MPN ACB30NE6H18Close Tolerance Bolt
- 5306-01-044-5196 MPN VAL23607-5D25Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-356-2529 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC5060-4-8 | Arconic Global Fasteners & Rings, |
VCB0055-4-8 | Valley-todeco, Inc. |
AIC1702-4-8 | Sps Technologies, Llc |
3D0075-4-8 | Boeing Company, The |
1702-4-8 | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)