NSN 5306-01-365-0363
Close Tolerance Hex Head Bolt
Between 1.244 inches and 1.264 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number AIC687-4D15 for national stock number 5306013650363.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-365-0363.
-
MPN or Model
AIC687-4D15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.244 inches and 1.264 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Head Minor Diameter
Between 0.448 inches and 0.455 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.126 inches first hole and 1.156 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-173-3597 MPN LD111-0044-2305Close Tolerance Screw
- 5306-00-883-9244 MPN VFK100G-06036Shear Bolt
- 5306-00-935-7528 MPN VFK100G-05028Shear Bolt
- 5306-01-027-1998 MPN VAL23029-5-7Close Tolerance Bolt
- 5306-01-054-3419 MPN C7521L6-13Shear Bolt
- 5306-01-060-7247 MPN C4356N8D2450Shoulder Bolt
- 5306-01-138-7728 MPN VFK600-5-23Shear Bolt
- 5306-01-142-4406 MPN VAL23608-7D39Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-365-0363 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC687-4D15 | Sps Technologies, Llc |
VS3174-4D15 | Arconic Global Fasteners & Rings, |
ST3M744-4D15 | Heartland Precision Fasteners, Inc. |
S406-4D15 | Huck International, Inc. |
ST3M744-4D15 | Fastener Innovation Technology, Inc. |
11823-4D15 | Reid Products Inc. |
VCG0001-4D15 | Valley-todeco, Inc. |
PBF1265-4D15 | Sps Technologies, Llc |
MB154-4D15 | Hi-shear Corporation |
122895-4D15 | Sps Technologies, Llc |
MB154-4D15 | Lisi Aerospace Canada Corp |
ST3M744-4D15 | Boeing Company, The |
ST3M744-4D15 | Sps Technologies Inc |
S406-4D15 | Huck Intl Inc |
VS3174-4D15 | Alcoa Global Fasteners, Inc. |
GS1015-4D15 | B & B Specialties Inc. |