NSN 5306-01-368-7315
Coaxial Connector
Between 3.591 inches and 3.621 inches fastener length, spline extended washer head style, 0.562 inches head height, extended washer diameter: between 1.153 inches and 1.163 inches .
Manufacturer part number 84268-10-42 for national stock number 5306013687315.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-368-7315.
-
MPN or Model
84268-10-42
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.981 inches -
Fastener Length
Between 3.591 inches and 3.621 inches -
Head Style
Spline extended washer -
Head Height
0.562 inches -
Extended Washer Diameter
Between 1.153 inches and 1.163 inches -
Extended Washer Thickness
0.090 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Head Minor Diameter
Between 0.673 inches and 0.688 inches -
Thread Diameter
0.625 inches -
Grip Length
2.625 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
18000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-049-3008 MPN BACB30LH3U20Close Tolerance Screw
- 5305-01-406-3075 MPN 3M925C3-11AClose Tolerance Screw
- 5305-01-465-2449 MPN 3M1170V4-5AClose Tolerance Screw
- 5305-01-512-8277 MPN 3M1170C5-11AFClose Tolerance Screw
- 5305-01-604-8543 MPN 3M1277E4D6ALMachine Screw
- 5306-00-508-7699 MPN VEP220555-8-14Machine Bolt
- 5306-01-075-9456 MPN J404P07BMachine Bolt
- 5306-01-113-9787 MPN BACB30LJ4DU9Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-368-7315 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84268-10-42 | Sps Technologies, Llc |
VCG0038-10-42 | Valley-todeco, Inc. |
AIC872-10-42 | Sps Technologies, Llc |
SLB264-10-42 | Space-lok, Inc. |
PBF1593-10-42 | Sps Technologies, Llc |
3447-10-42 | Arconic Global Fasteners & Rings, |
3D0028-10-42 | Boeing Company, The |
872-10-42 | Sps Technologies, Llc |