NSN 5306-01-470-5082
Coaxial Connector
4.903 inches fastener length, hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6208-70 for national stock number 5306014705082.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-470-5082.
-
MPN or Model
NAS6208-70
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
4.903 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4945 inches and 0.4950 inches -
End Application
1520-01-135-8250 -
Thread Diameter
0.500 inches -
Grip Length
Between 4.365 inches and 4.385 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel -
Material Specification
Nas 4002 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6040 MPN NAS1063Terminal Board Marker Strip
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-004-5099 MPN NAS662C2LLR16Socket Head Cap Screw
- 5305-00-053-1114 MPN MS24621-11Tapping Screw
- 5305-00-069-4959 MPN MS24677-61Socket Head Cap Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-088-9671 MPN NAS560CK2P5Machine Screw
- 5305-00-165-7950 MPN NAS1351C8-40Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-470-5082 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6208-70 | National Aerospace Standards |
Stock Check
- NS: 22
- NE: 374