NSN 5306-01-527-2205
Close Tolerance Hex Head Bolt
For use with st3m436-() series nuts.
Manufacturer part number ST3M453-10D40 for national stock number 5306015272205.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-527-2205.
-
MPN or Model
ST3M453-10D40
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
013280 - Alum Bolts -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.777 inches -
Fastener Length
Between 3.261 inches and 3.308 inches -
Head Style
Double hexagon -
Head Height
Between 0.340 inches and 0.360 inches -
Width Between Flats
0.940 inches -
Grip Diameter
Between 0.6235 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.146 inches first hole -
End Application
F/a 18 e/f aircraft -
Thread Diameter
0.6250 inches -
Grip Length
Between 2.490 inches and 2.510 inches -
Thready Qty Per Inch (tpi)
18 -
Criticality Code Justification
Agav -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.142 inches first hole and 3.179 inches first hole -
Part Name Assigned By Controlling Agency
Bolt, close tolerance, double hex head, cres -
Material
Steel comp xm-13 -
Material Specification
Ams 5629, ph13-8-0 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams-aa-p-35 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-102-5531 MPN 3M925C5-7DClose Tolerance Screw
- 5305-01-105-9373 MPN 3M926-3L2Close Tolerance Screw
- 5305-01-197-0949 MPN BACS12CK3U7Machine Screw
- 5305-01-351-7817 MPN VCL0007-5D19Close Tolerance Screw
- 5305-01-412-5361 MPN LD111-0044-0812Close Tolerance Screw
- 5305-01-603-8154 MPN PMT8703-12Close Tolerance Screw
- 5306-00-077-9286 MPN VCD0020-10-33Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-527-2205 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M453-10D40 | Boeing Company, The |
PBF125310D40 | Sps Technologies, Llc |
109453-10D40 | Sps Technologies, Llc |
FIT7047-10D40 | Fastener Innovation Technology, Inc. |
S11-1060-10D40 | Sonic Industries Inc. |
VAL23029-10D40 | Valley-todeco, Inc. |
A1C753-10D40 | Sps Technologies, Llc |
VS3204-10D40 | Arconic Global Fasteners & Rings, |
BM17019-10D40 | Huck International, Inc. |
MB61-10D40 | Hi-shear Corporation |
109453-10D40 | Sps Technologies, Llc |
MB61-10D40 | Lisi Aerospace Canada Corp |
109453-10D40 | Sps Technologies Inc |
GS1016-10D40 | B & B Specialties Inc. |