NSN 5306-01-617-3957
Coaxial Connector
3.653 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6208-50 for national stock number 5306016173957.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-617-3957.
-
MPN or Model
NAS6208-50
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
3.653 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.494 inches and 0.495 inches -
Thread Diameter
0.500 inches -
Grip Length
3.125 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-3026 MPN NAS1102C04-7PMachine Screw
- 5305-00-008-5905 MPN NAS1189C02T5LSocket Head Cap Screw
- 5305-00-008-9117 MPN NAS1190E04T4LSocket Head Cap Screw
- 5305-00-020-3842 MPN NAS1402-27Machine Screw
- 5305-00-052-2234 MPN MS24667-76Socket Head Cap Screw
- 5305-00-053-1117 MPN MS24621-16Tapping Screw
- 5305-00-059-3662 MPN NAS1635-3-14Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-617-3957 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6208-50 | National Aerospace Standards |
Stock Check
- NS: 19
- NE: 98