NSN 5905-00-888-7486

Datasheet

• Product description
  

  Nonprecision Nonwire Wound Variable Resistor NSN 5905-00-888-7486.

• MPN or Model
  

  72468REVC

• Schedule B
  8533.40.0080 (Variable resistors, including potentiometers, nesoi)
• NMF (National Motor Freight)
  062960 - Reostats/parts NOI
• Section Quantity
  1
• Body Style
  Cylindrical bushing mounted
• Reliability Indicator
  Not established
• Body Diameter
  1.094 inches
• Shaft Diameter
  0.250 inches
• Shaft Length
  0.875 inches
• Mounting Bushing Length
  0.375 inches
• Body Length
  0.562 inches
• Shaft Style
  Round, slotted
• Shaft Bearing Type
  Sleeve
• Actuator Type
  Single shaft
• Effective Electrical Rotation In Deg Angular Rotation
  Between 309.0 and 320.0
• Maximum Starting Torque
  6.00 inch-ounces
• Maximum Running Torque
  6.00 inch-ounces
• Maximum Stop Torque
  128.00 inch-ounces
• Nonturn Device Location
  At 9 oclock
• Nonturn Device Radius
  0.531 inches
• Screw Thread Diameter
  0.375 inches
• Screw Thread Series Designator
  Unef
• Screw Thready Qty Per Inch (tpi)
  32.0
• Terminal Location
  Radially positioned over less than half the circumference
• Mounting Method
  Standard bushing
• Cubic Measure
  0.528 cubic inches
• Electrical Resistance Per Section
  5.0 kilohms single section
• Rotary Actuator Travel In Angular Deg
  Between 309.0 and 320.0
• Resistance Tempurature Characteristic Range Per Section In Percent
  -3.0/+0.0 -55 degrees celsius single section and -5.0/+10.0 -25 degrees celsius single section and -5.0/+10.0 25 degrees celsius single section and +0.0/+3.0 120 degrees celsius single section
• Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
  120.0 single section
• Power Dissipation Rating Per Section In Watts
  2.0 free air single section
• Resistance Tolerance Per Section In Percent
  -10.0/+10.0 single section
• Actuator Travel Control Feature
  Stops
• Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
  70.0 single section
• Standard Taper Curve Per Section
  A single section
• Test Data Document
  15786-72468 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
• Terminal Type And Quantity
  3 tab, solder lug