NSN 5320-00-406-2295
Lockbolt
About this product
Between 0.490 inches and 0.510 inches fastener length, flush countersunk head style, between 0.079 inches and 0.080 inches width between flats, shank diameter: between 0.164 inches and 0.165 inches .
Manufacturer part number HL329-5-3 for national stock number 5320004062295.
Datasheet
-
Product description
Pin-rivet NSN 5320-00-406-2295.
-
MPN or Model
HL329-5-3
-
Schedule B
7318.23.0000 (Rivets of iron or steel) -
NMF (National Motor Freight)
095190 - Hardware, NOI Sub 9 -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
Between 0.490 inches and 0.510 inches -
Head Style
Flush countersunk -
Width Between Flats
Between 0.079 inches and 0.080 inches -
Shank Diameter
Between 0.164 inches and 0.165 inches -
Shank Style
Pin-rivet, straight, threaded -
Head Major Diameter
Between 0.256 inches and 0.261 inches -
Grip Length
0.193 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Thread Size
0.164 inches -
Shear Strength
108000 single pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-061-6349 MPN BM21010-3-10Shoulder Screw
- 5305-00-354-4292 MPN HT4024L3-19Close Tolerance Screw
- 5305-00-526-1037 MPN BACB30LU3-7Close Tolerance Screw
- 5305-00-916-9488 MPN NAS1125-29HClose Tolerance Screw
- 5305-01-068-1294 MPN NAS1189-08P8BHSocket Head Cap Screw
- 5305-01-080-2979 MPN 583R583H37Panel Screw Assembly
- 5305-01-084-2497 MPN HT4010-8-9Shoulder Screw
- 5305-01-102-5523 MPN HT4057-3-9AClose Tolerance Screw
Pin-rivet
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Pricing and Availability
Get a quote for 5320-00-406-2295 pin-rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HL329-5-3 | Hi-shear Corporation |
HL329-5-3 | Sps Technologies, Llc |
HL329-5-3 | Huck Intl Inc |
HL329-5-3 | Alcoa Global Fasteners, Inc. |
HL329-5-3 | Huck International, Inc. |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.