NSN 5320-00-843-8180
Blind High Strength Fastener
About this product
0.795 inches fastener length, flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) head style, between 0.1625 inches and 0.1645 inches shank diameter, shank style: threaded self-plugging shank w/sleeve.
Manufacturer part number WF164-3 for national stock number 5320008438180.
Datasheet
-
Product description
Blind Rivet NSN 5320-00-843-8180.
-
MPN or Model
WF164-3
-
Schedule B
7318.23.0000 (Rivets of iron or steel) -
NMF (National Motor Freight)
106510 - Rivets I/s Plain/galvanized Etc -
Fastener Length
0.795 inches -
Head Style
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) -
Shank Diameter
Between 0.1625 inches and 0.1645 inches -
Shank Style
Threaded self-plugging shank w/sleeve -
Head Major Diameter
0.320 inches -
Expansion Device
Threaded stem -
Grip Length
0.187 inches -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c nut and 43.0 rockwell c nut -
Countersink Angle
100.0 degrees -
Material
Steel comp 304 sleeve or steel comp 303f sleeve or steel comp 303 sleeve -
Material Specification
Qq-s-763 federal specification 1st material response sleeve or ams 5639 assn standard 1st material response sleeve or ams 5641 assn standard 2nd material response sleeve or astm a582 assn standard 3rd material response sleeve -
Surface Treatment
Cadmium sleeve and passivate sleeve -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response nut
More from these suppliers
- 5320-00-063-8742 MPN PP0200-4Blind Rivet
- 5320-00-619-2955 MPN PPA200-5Blind Rivet
- 5320-00-702-1981 MPN FF260-16Blind Rivet
- 5320-00-078-8833 MPN P164A-10Blind Rivet
- 5320-00-529-1144 MPN PL260A-5Blind Rivet
- 5320-00-550-4479 MPN FL260-2Blind Rivet
- 5320-00-932-3881 MPN PLT214-8-4Blind Rivet
- 5320-01-025-0176 MPN PLT211-8-3Pin-rivet
Blind Rivet
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes nut, blind assembly.
Pricing and Availability
Get a quote for 5320-00-843-8180 blind rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
WF164-3 | Monogram Aerospace Fasteners, Inc. |
WF164-3 | Custom Craft Products Inc |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.