NSN 5320-00-871-9178
Lockbolt
About this product
Between 0.627 inches and 0.647 inches fastener length, flush countersunk head style, between 0.0791 inches and 0.0806 inches width between flats, shank diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HL61-6-5 for national stock number 5320008719178.
Datasheet
-
Product description
Pin-rivet NSN 5320-00-871-9178.
-
MPN or Model
HL61-6-5
-
Schedule B
7318.23.0000 (Rivets of iron or steel) -
NMF (National Motor Freight)
095190 - Hardware, NOI Sub 9 -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
Between 0.627 inches and 0.647 inches -
Head Style
Flush countersunk -
Width Between Flats
Between 0.0791 inches and 0.0806 inches -
Shank Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Style
Pin-rivet, straight, threaded -
Head Major Diameter
0.3016 inches -
Lubrication
Cetyl alcohol, specification 305, hi-shear corp -
Grip Length
0.317 inches -
Thready Qty Per Inch (tpi)
32 -
Thread Size
0.190 inches -
Shear Strength
125000 single pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 431 -
Material Specification
Ams 5628 assn standard single material response or mil-s-18732 military specification single material response -
Surface Treatment
Cadmium or chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-003-1567 MPN A51B20592-1Wing Fairing Fitting
- 1560-00-007-5910 MPN A51P60786-11Dump Drain Fitting
- 4820-00-024-4693 MPN GV500LT20BBCheck Valve
- 1560-00-046-8171 MPN SP489Air Duct Sleeve
- 1560-00-066-6183 MPN 123CS11505-3Rudder Tab Tip
- 1560-00-066-6185 MPN 123CSP10033-3Rudde Skin Assembly
- 4920-00-070-9854 MPN 128GT10161T3Bearin Swaging Tool
- 1560-00-098-0911 MPN 89L1102-1Rod Asy
Pin-rivet
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Pricing and Availability
Get a quote for 5320-00-871-9178 pin-rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HL61-6-5 | Hi-shear Corporation |
HL61-6-5 | Alcoa Global Fasteners, Inc. |
HL61-6-5 | Lisi Aerospace Canada Corp |
HL61-3-5 | Hi-shear Corporation |
GB510E3-5 | Northrop Grumman Systems Corporation |
HL61-6-5 | Sps Technologies, Llc |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.