NSN 5320-00-957-1418
Blind High Strength Fastener
About this product
0.295 inches fastener length, flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) head style, between 0.124 inches and 0.128 inches shank diameter, shank style: pull through hollow shank.
Manufacturer part number MS20605B4W3 for national stock number 5320009571418.
Datasheet
-
Product description
Blind Rivet NSN 5320-00-957-1418.
-
MPN or Model
MS20605B4W3
-
Schedule B
7616.10.3000 (Aluminum rivets) -
NMF (National Motor Freight)
013630 - Alum Rivets -
Unit Weight (Est.)
0.1 lb -
Fastener Length
0.295 inches -
Head Style
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) -
Shank Diameter
Between 0.124 inches and 0.128 inches -
Shank Style
Pull through hollow shank -
Head Major Diameter
0.225 inches -
Expansion Device
Serrated stem-type w -
Grip Length
Between 0.126 inches and 0.187 inches -
Shear Strength
125 single pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Aluminum alloy 5056 stem -
Material Specification
Mil-w-7986 military specification single material response stem -
Surface Treatment
Anodize stem or chromate stem -
Surface Treatment Specification
Mil-a-8625 military specification 1st treatment response stem or mil-c-5541 military specification 2nd treatment response stem
More from these suppliers
- 5935-00-026-9600 MPN MS3476L14-5PYElectrical Plug Connector
- 5905-00-045-5422 MPN RW69VR10Inductive Wire Wound Fixed Resistor
- 5935-00-169-2251 MPN MS27499E18B35SElectrical Receptacle Connector
- 5935-00-172-1142 MPN MS17344R18C11PXElectrical Plug Connector
- 5935-00-201-8413 MPN MS3102E28-15PElectrical Receptacle Connector
- 5930-00-402-1007 MPN MS27716-23Toggle Switch
- 5935-00-496-7655 MPN MS18181-1Electrical Connector Insert
- 5940-00-502-7688 MPN MS21980-149Grounding Metallic Shielded Cable Ferrule
Blind Rivet
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes nut, blind assembly.
Pricing and Availability
Get a quote for 5320-00-957-1418 blind rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS20605B4W3 | Military Standards |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.