NSN 5320-01-270-8184
Blind High Strength Fastener
About this product
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) head style, between 0.2580 inches and 0.2600 inches shank diameter, between 0.3898 inches and 0.3948 inches head major diameter, expansion device: serrated stem-type w.
Manufacturer part number PLT1008-8-6 for national stock number 5320012708184.
Datasheet
-
Product description
Blind Rivet NSN 5320-01-270-8184.
-
MPN or Model
PLT1008-8-6
-
Schedule B
7318.23.0000 (Rivets of iron or steel) -
NMF (National Motor Freight)
106510 - Rivets I/s Plain/galvanized Etc -
Unit Weight (Est.)
0.1 lb -
Head Style
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) -
Shank Diameter
Between 0.2580 inches and 0.2600 inches -
Head Major Diameter
Between 0.3898 inches and 0.3948 inches -
Expansion Device
Serrated stem-type w -
Grip Length
Between 0.345 inches and 0.406 inches -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4130 bolt or steel comp 8740 boltsteel comp 4130 nut or steel comp 8740 nutsteel comp 303 sleeve or steel comp 304 sleeve or steel comp 303se sleeve -
Material Specification
Mil-s-6758 military specification 1st material response bolt or mil-s-6049 military specification 2nd material response boltmil-s-6758 military specification 1st material response nut or mil-s-6049 military specification 2nd material response nutqq-s-763 federal specification 1st material response sleeve or qq-s-763 federal specification 2nd material response sleeve or ams 5639 assn standard 2nd material response sleeve or ams 5641 assn standard 3rd material response sleeve -
Surface Treatment
Cadmium bolt and chromate boltcadmium nut and chromate nutpassivate sleeve and cadmium sleeve -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response boltqq-p-416, type 2, cl 2 federal specification single treatment response nutmil-s-5002 military specification 1st treatment response sleeve and qq-p-416, type 1, cl 3 federal specification 2nd treatment response sleeve
More from these suppliers
- 5305-00-034-1601 MPN HT8043-3-41TClose Tolerance Screw
- 5305-00-177-5688 MPN CVC241-3-14Machine Screw
- 5305-00-505-3964 MPN LS15267V3-8Machine Screw
- 5305-01-008-4197 MPN HT4025L4-16Close Tolerance Screw
- 5305-01-055-2832 MPN VT1694F3-12Close Tolerance Screw
- 5305-01-056-4220 MPN C7986-10-52Close Tolerance Screw
- 5305-01-072-4704 MPN HT4016-4-8XShoulder Screw
- 5305-01-076-4945 MPN SC1810-3-3Close Tolerance Screw
Blind Rivet
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes nut, blind assembly.
Pricing and Availability
Get a quote for 5320-01-270-8184 blind rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PLT1008-8-6 | Monogram Aerospace Fasteners, Inc. |
PLT1008-8-6 | Arconic Global Fasteners & Rings, |
PLT1008-8-6 | Huck International, Inc. |
PLT1008-8-6 | Sps Technologies, Llc |
Stock Check
Availability for this item was last checked on 12/06/22.
The quantities and conditions available at the time were:
- NE: 3
- NS: 1