NSN 5320-01-311-1848
Lockbolt
About this product
Between 1.395 inches and 1.415 inches fastener length, flush countersunk head style, between 0.127 inches and 0.130 inches width between flats, shank diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number HL51-10-14 for national stock number 5320013111848.
Datasheet
-
Product description
Pin-rivet NSN 5320-01-311-1848.
-
MPN or Model
HL51-10-14
-
Schedule B
7318.23.0000 (Rivets of iron or steel) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
Between 1.395 inches and 1.415 inches -
Head Style
Flush countersunk -
Width Between Flats
Between 0.127 inches and 0.130 inches -
Shank Diameter
Between 0.311 inches and 0.312 inches -
Shank Style
Pin-rivet, straight, threaded -
Head Major Diameter
Between 0.469 inches and 0.474 inches -
Grip Length
Between 0.870 inches and 0.880 inches -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Thread Size
0.312 inches -
Shear Strength
95000 single pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp e4340 or steel comp 4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-5626 military specification 3rd material response or mil-s-6049 military specification 4th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-081-6276 MPN 3MA584-34Machine Screw
- 5305-00-411-6532 MPN HT195-8-14Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-680-6013 MPN HT4M-20Close Tolerance Screw
- 5305-00-680-6395 MPN NAS1203-5Close Tolerance Screw
- 5305-00-817-4586 MPN NAS1101-02-14Machine Screw
- 5305-00-891-1725 MPN HT195-5-24Close Tolerance Screw
- 5305-00-932-3910 MPN HT6V15Machine Screw
Pin-rivet
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Pricing and Availability
Get a quote for 5320-01-311-1848 pin-rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HL51-10-14 | Hi-shear Corporation |
HL51-10-14 | Lisi Aerospace Canada Corp |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.