NSN 5320-01-322-3570
Blind High Strength Fastener
About this product
0.656 inches fastener length, flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) head style, between 0.258 inches and 0.260 inches shank diameter, shank style: self-plugging mechanically locked stem.
Manufacturer part number MS21140U0807 for national stock number 5320013223570.
Datasheet
-
Product description
Blind Rivet NSN 5320-01-322-3570.
-
MPN or Model
MS21140U0807
-
Schedule B
7318.23.0000 (Rivets of iron or steel) -
NMF (National Motor Freight)
106510 - Rivets I/s Plain/galvanized Etc -
Unit Weight (Est.)
0.1 lb -
Fastener Length
0.656 inches -
Head Style
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) -
Shank Diameter
Between 0.258 inches and 0.260 inches -
Shank Style
Self-plugging mechanically locked stem -
Head Major Diameter
0.508 inches -
Expansion Device
Serrated stem-type w -
Lubrication
Dry film -
Grip Length
Between 0.406 inches and 0.470 inches -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 98.5 degrees and 101.5 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate stem -
Surface Treatment Specification
Qq-p-35 federal specification 1st treatment response sleeve or qq-p-416, type 2, cl 2 federal specification 2nd treatment response sleeve
More from these suppliers
- 5935-00-009-9982 MPN MS27510A14CElectrical Connector Cover
- 5905-00-064-2687 MPN MS75009-36Resistor Assembly
- 5905-00-157-0881 MPN MS35049-27Inductive Wire Wound Fixed Resistor
- 5940-00-229-7550 MPN MS20659-38Lug Terminal
- 5905-00-249-4227 MPN MS35045-211Composition Fixed Resistor
- 5950-00-279-6539 MPN MS75085-3Radio Frequency Coil
- 5935-00-296-8008 MPN MS3106A14-3PElectrical Plug Connector
- 5935-00-430-4051 MPN MS27467T25B43PElectrical Plug Connector
Blind Rivet
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes nut, blind assembly.
Pricing and Availability
Get a quote for 5320-01-322-3570 blind rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21140U0807 | Military Standards |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.