NSN 5320-01-527-3936
Lockbolt
About this product
Flush countersunk head style, between 0.126 inches and 0.128 inches head height, between 0.626 inches and 0.627 inches shank diameter, shank style: pin-rivet, tapered, threaded.
Manufacturer part number HL65PB79-10-13 for national stock number 5320015273936.
Datasheet
-
Product description
Pin-rivet NSN 5320-01-527-3936.
-
MPN or Model
HL65PB79-10-13
-
Schedule B
7318.23.0000 (Rivets of iron or steel) -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Flush countersunk -
Head Height
Between 0.126 inches and 0.128 inches -
Shank Diameter
Between 0.626 inches and 0.627 inches -
Shank Style
Pin-rivet, tapered, threaded -
Head Major Diameter
Between 0.628 inches and 0.633 inches -
Tip Diameter
Between 0.302 inches and 0.306 inches -
Collar Outside Diameter
Between 0.512 inches and 0.518 inches -
Collarheight
Between 0.652 inches and 0.672 inches -
Collar Inside Diameter
0.552 inches -
End Application
Helicopter ch-53g -
Shear Strength
16000 double pounds per square inch -
Countersink Angle
100.0 degrees -
Collar Style
Threaded break off type -
Material
Steel body -
Material Specification
Mil-s-5000 military specification single material response body -
Surface Treatment
Cadmium body -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response body -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-232-4513 MPN HT7A29Screw
- 5305-00-927-6426 MPN NAS1131-3Close Tolerance Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-046-3342 MPN HT4010-5-6Shoulder Screw
- 5305-01-065-6290 MPN HT239PB-3-6DClose Tolerance Screw
- 5305-01-106-3859 MPN HT4068-4-14Close Tolerance Screw
- 5305-01-133-7206 MPN LB35-4-09Close Tolerance Screw
- 5305-01-158-6253 MPN ST3M730-4L12Close Tolerance Screw
Pin-rivet
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Pricing and Availability
Get a quote for 5320-01-527-3936 pin-rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HL65PB79-10-13 | Hi-shear Corporation |
HL65PB79-10-13 | Lisi Aerospace Canada Corp |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.