NSN 5305-00-012-2104
Tap Bolt
0.625 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number MS35291-57 for national stock number 5305000122104.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-012-2104.
-
MPN or Model
MS35291-57
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.625 inches -
Fastener Length
0.625 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
69000 pounds per square inch -
Hardness Rating
100.0 rockwell b -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
2 type and 10p style
More from these suppliers
- 4920-00-345-1120 MPN 125960Aircraft Maintenance Fixture
- 4920-00-349-1588 MPN 7069Interface Device Adapter Assembly
- 4920-00-623-6730 MPN 6796577Interface Device Adapter Assembly
- 5975-00-717-6713 MPN 6780820-07Electrical Conduit Ferrule
- 5905-00-810-9068 MPN 8597263-459Film Fixed Resistor
- 1680-00-858-0587 MPN 5707831Actuato Bearing Kit
- 4920-00-859-3717 MPN 6529632Aircraft Maintenance Fixture
- 5305-00-014-1766 MPN 141766Drive Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-012-2104 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35291-57 | Military Standards |
FFS85TYPEIISTYLE10P | Federal Specifications |
122104 | General Motors Corp |
Stock Check
- NS: 59
- NE: 5899