NSN 5305-00-033-4887
Tap Bolt
Between 0.552 inches and 0.572 inches fastener length, hexagon head style, between 0.146 inches and 0.166 inches head height, width between flats: 0.438 inches .
Manufacturer part number 231648 for national stock number 5305000334887.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-033-4887.
-
MPN or Model
231648
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
Between 0.452 inches and 0.552 inches -
Fastener Length
Between 0.552 inches and 0.572 inches -
Head Style
Hexagon -
Head Height
Between 0.146 inches and 0.166 inches -
Width Between Flats
0.438 inches -
Thread Diameter
0.250 inches -
Nonstandard Thread Pitch Diameter
+0.2216 to 0.2238 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
30.0 rockwell c and 38.0 rockwell c -
Material
Stainless steel -
Material Specification
Ams 5616 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-622-0423 MPN 346001Valve Body
- 4920-00-837-3895 MPN PWA22065Interface Device Adapter Assembly
- 4920-00-959-0674 MPN PWA15501Fuel Control System Components Test Station
- 5975-01-107-1231 MPN PWA52665-10Electrical Box Connector
- 4920-01-388-4249 MPN PWA80449Hold Down Plugs
- 4920-01-422-9108 MPN PWA 71479Aircraft Engine Maintenance Fixture
- 4920-01-461-8983 MPN PWA35212Aircraft Maintenance Adapter Set
- 4920-01-466-5923 MPN PWA71928Aircraft Engine Component Polishing Adapter
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-033-4887 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
231648 | Alcoa Global Fasteners, Inc. |
231648 | United Technologies Corporation |