NSN 5305-00-114-1967
High Torque Screw
Aluminum grommet 0.012 in. Thk on bearing surface of head.
Manufacturer part number 51B294-3 for national stock number 5305001141967.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-114-1967.
-
MPN or Model
51B294-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.271 inches and 0.326 inches -
Fastener Length
Between 0.488 inches and 0.535 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.496 inches and 0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 430fse or steel comp 81b45 or steel comp 4140 or steel comp 302b -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-144-0509 MPN AIC84-3-10Machine Screw
- 5305-00-505-2680 MPN LS15262V3-22Machine Screw
- 5305-01-044-8534 MPN BACB30LU2-8Close Tolerance Screw
- 5305-01-158-5367 MPN AIC940-5-8Machine Screw
- 5305-01-243-9350 MPN SM-C-800983-49Socket Head Cap Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
- 5305-01-417-2496 MPN TX1027D3-20AClose Tolerance Screw
- 5305-01-428-2139 MPN AIC985-4-7RShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-114-1967 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B294-3 | Sps Technologies, Llc |
51B294-3 | Northrop Grumman Technical Services, |
51B924-3 | Arconic Global Fasteners & Rings, |
51B294-3 | Sps Technologies, Llc |
51B924-3 | Huck International, Inc. |
51B294-3 | Hi-shear Corporation |
51B924-3 | Sps Technologies, Llc |
51B294-3 | Lisi Aerospace Canada Corp |
51B294-3 | Tilley John S Ladder Co Inc |
51B294-3 | Northrop Grumman Systems Corporation |