NSN 5305-00-121-2461
High Torque Screw
Between 0.921 inches and 0.968 inches fastener length, flat countersunk head style, between 0.469 inches and 0.474 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number HT5V9 for national stock number 5305001212461.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-121-2461.
-
MPN or Model
HT5V9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.349 inches and 0.416 inches -
Fastener Length
Between 0.921 inches and 0.968 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.469 inches and 0.474 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Surface Finish
16.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-227-1263 MPN HT42N16Shoulder Screw
- 5305-00-349-0285 MPN LS15235C3-2Close Tolerance Screw
- 5305-00-754-2071 MPN NAS1203-9Close Tolerance Screw
- 5305-00-764-3030 MPN HT5UA-13Machine Screw
- 5305-00-802-1827 MPN 51B221-1Close Tolerance Screw
- 5305-00-808-2152 MPN HT9M28Close Tolerance Screw
- 5305-00-935-7513 MPN NAS1101-00-3Machine Screw
- 5305-00-936-9883 MPN 3MFR1504-9Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-121-2461 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT5V9 | Hi-shear Corporation |