NSN 5305-00-207-1614
Bolt Stove
1.375 inches fastener length, flat countersunk head style, between 0.249 inches and 0.279 inches head diameter, internal drive style: slot.
Manufacturer part number AN507-632R22 for national stock number 5305002071614.
Datasheet
-
Product description
Machine Screw NSN 5305-00-207-1614.
-
MPN or Model
AN507-632R22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
6 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.313 inches and 1.375 inches -
Fastener Length
1.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.249 inches and 0.279 inches -
Internal Drive Style
Slot -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-192-1422 MPN AN3108A24-5PElectrical Plug Connector
- 5935-00-201-2752 MPN AN3102E18-8SElectrical Receptacle Connector
- 5945-00-259-0541 MPN AN3370-2Electromagnetic Relay
- 5975-00-266-1984 MPN AN3050-10Electrical Conduit Ferrule
- 5940-01-386-4462 MPN AN3252B6Terminal Board
- 5305-00-144-3765 MPN AN515-10R28Machine Screw
- 5305-00-274-0492 MPN 525-10R20Machine Screw
- 5305-00-282-4328 MPN AN520C10R8Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-207-1614 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN507-632R22 | Aeronautical Standards Group |