NSN 5305-00-271-8186
Bolt Stove
Between 1.438 inches and 1.500 inches fastener length, flat countersunk head style, between 0.348 inches and 0.385 inches head diameter, internal drive style: slot.
Manufacturer part number AN507-1032-24 for national stock number 5305002718186.
Datasheet
-
Product description
Machine Screw NSN 5305-00-271-8186.
-
MPN or Model
AN507-1032-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.293 inches -
Fastener Length
Between 1.438 inches and 1.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.348 inches and 0.385 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 1010 -
Screw Material Specification
Qq-s-633 federal specification single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Nondefinitive Specification/std Data
1 type and 3s style
More from these suppliers
- 5930-00-050-2699 MPN AN3027-3Toggle Switch
- 5935-00-280-1873 MPN AN3102A24-10PElectrical Receptacle Connector
- 4820-00-287-4120 MPN AN771P1Drain Cock
- 5935-00-295-6897 MPN AN3102C28-2PWElectrical Receptacle Connector
- 5935-00-204-9405 MPN AN3106E28-15SYElectrical Plug Connector
- 5305-00-061-3791 MPN AN505PB6R6Machine Screw
- 5305-00-151-1316 MPN AN505B4R3Machine Screw
- 5305-00-151-2409 MPN AN509-10R300Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-271-8186 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN507-1032-24 | Aeronautical Standards Group |