NSN 5305-00-285-2339
High Torque Screw
Between 0.665 inches and 0.732 inches fastener length, flat countersunk head style, 0.398 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT4V6 for national stock number 5305002852339.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-285-2339.
-
MPN or Model
HT4V6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.229 inches and 0.276 inches -
Fastener Length
Between 0.665 inches and 0.732 inches -
Head Style
Flat countersunk -
Head Diameter
0.398 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 431 -
Material Specification
Ams 5628 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-524-1135 MPN HST112-8-10Materi Aircraft Pin
- 5305-00-008-5899 MPN NAS1191-06P10LMachine Screw
- 5305-00-080-9258 MPN 3MA584-15Machine Screw
- 5305-00-508-3070 MPN LS15234C4-8Close Tolerance Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
- 5305-00-814-6167 MPN NAS1204-62Close Tolerance Screw
- 5305-00-842-7546 MPN HT195-5-11Close Tolerance Screw
- 5305-00-932-1831 MPN 51B581-3-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-285-2339 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4V6 | Hi-shear Corporation |