NSN 5305-00-448-8113
High Torque Screw
Furnishwith one o-ring per 7m80 73197.
Manufacturer part number HT5UA11 for national stock number 5305004488113.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-448-8113.
-
MPN or Model
HT5UA11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.203 inches and 1.250 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.628 inches and 0.633 inches -
Head Height
Between 0.087 inches and 0.089 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-061-6464 MPN HT193LB3-4Machine Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-431-7217 MPN HR101V-4-18Close Tolerance Screw
- 5305-00-505-2920 MPN LS15234C3-5Close Tolerance Screw
- 5305-00-505-3048 MPN LS15234C06-13Close Tolerance Screw
- 5305-00-932-5631 MPN HT111AR3-5Machine Screw
- 5305-00-938-9039 MPN HT61A19Shoulder Screw
- 5305-01-063-3777 MPN NAS1190-08P26BSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-448-8113 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT5UA11 | Hi-shear Corporation |
HT5UA11 | Lisi Aerospace Canada Corp |
HT5UA11 | Alcoa Fastening Systems |
HT5UA11 | Satair A/s |