NSN 5305-00-450-4085
High Torque Screw
Bearing surface of head to be grooved to 0.394 in. Min 0.396 in. Max dia,0.092 in. Min 0.097 in. Max from top of head.
Manufacturer part number HR101H5-10 for national stock number 5305004504085.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-450-4085.
-
MPN or Model
HR101H5-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.423 inches and 0.473 inches -
Fastener Length
Between 1.058 inches and 1.088 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.531 inches and 0.558 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 59.75 degrees and 60.25 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-050-9001 MPN AIC984-3-9PClose Tolerance Screw
- 5305-01-290-7453 MPN AIC9535-8-15Close Tolerance Screw
- 5305-01-381-1408 MPN 1701-4-12Close Tolerance Screw
- 5305-01-381-1483 MPN 1701-3-15Close Tolerance Screw
- 5305-01-412-5357 MPN LD111-0045-2409Close Tolerance Screw
- 5305-01-435-5786 MPN BACB30LU8-29Close Tolerance Screw
- 5305-01-439-6125 MPN TX1026V3-20AClose Tolerance Screw
- 5305-01-496-1429 MPN TX1027C3-4AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-450-4085 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR101H5-10 | Hi-shear Corporation |
VT1039H5-10 | Alcoa Global Fasteners, Inc. |
CS318642H5-10 | Textron Fastening Systems |
AIC1023H5-10 | Sps Technologies, Llc |
HR101H5-10 | Lisi Aerospace Canada Corp |
C387H5-10 | Lockheed Martin Corporation |