NSN 5305-00-453-7479
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number NAS1132V6 for national stock number 5305004537479.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-453-7479.
-
MPN or Model
NAS1132V6
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096660 - Screws NOI Silver Plated -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjc
More from these suppliers
- 5935-00-817-9981 MPN NAS714-15Electrical Receptacle Connector
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-007-2943 MPN NAS1100E06-9PMachine Screw
- 5305-00-087-2992 MPN NAS1300-4T12Thumbscrew
- 5305-00-144-0420 MPN MS35191-349Machine Screw
- 5305-00-166-3557 MPN NAS1352C3-14Socket Head Cap Screw
- 5305-00-205-3844 MPN NAS1218-3-9Machine Screw
- 5305-00-207-2793 MPN MS24694C98Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-453-7479 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1132V6 | National Aerospace Standards |