NSN 5305-00-486-3568
Panel Screw
Flat chamfer head style, between 0.235 inches and 0.255 inches head diameter, between 0.132 inches and 0.156 inches head height, first diameter from head: between 0.139 inches and 0.145 inches .
Manufacturer part number 549-0944-004 for national stock number 5305004863568.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-486-3568.
-
MPN or Model
549-0944-004
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
2a -
Head Style
Flat chamfer -
Head Diameter
Between 0.235 inches and 0.255 inches -
Head Height
Between 0.132 inches and 0.156 inches -
First Diameter From Head
Between 0.139 inches and 0.145 inches -
Second Diameter From Head
Between 0.159 inches and 0.165 inches -
Third Diameter From Head
Between 0.250 inches and 0.270 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
Between 5.024 inches and 5.054 inches -
Distance From Largest Bearing Surface Of Head To End Of Third Diameter
Between 5.118 inches and 5.148 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-062-5083 MPN 371-6995-000Electrical Receptacle Connector
- 5945-00-086-8775 MPN 402-0363-00Motor Driven Relay
- 5940-00-100-6759 MPN 554-9413-003Terminal Board
- 5945-00-102-9371 MPN 974-0469-290Electromagnetic Relay
- 5905-00-114-4018 MPN 745-1047-000Composition Fixed Resistor
- 5950-00-115-1220 MPN 779-1361-001Electrical Coil
- 5905-00-115-8166 MPN 377-0718-080Nonprecision Wire Wound Variable Resistor
- 5905-00-138-6959 MPN 724-1016-480Film Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-486-3568 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
549-0944-004 | Rockwell Collins, Inc. |
549-0944-004 | Rockwell Collins, Inc. |