NSN 5305-00-500-0982
High Torque Screw
Between 1.228 inches and 1.248 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS27577-5-12 for national stock number 5305005000982.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-500-0982.
-
MPN or Model
MS27577-5-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.327 inches and 0.362 inches -
Fastener Length
Between 1.228 inches and 1.248 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.750 inches and 0.766 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.113 inches first hole and 1.143 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-443-9364 MPN CA28102-4-12HHPanel Screw Assembly
- 5306-01-359-6902 MPN CA21037-6-2HSInternal Wrenching Bolt
- 5305-00-057-1679 MPN NAS1101-02-6Machine Screw
- 5305-00-283-7457 MPN 110179-5-6ASClose Tolerance Screw
- 5305-00-299-6340 MPN 331193Machine Screw
- 5305-00-720-9112 MPN NAS1204-4Close Tolerance Screw
- 5305-01-027-2006 MPN CHT4020-4-10AClose Tolerance Screw
- 5305-01-049-8194 MPN HT4028L8-7MClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-500-0982 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-5-12 | Military Standards |
106466-5-12 | Sps Technologies, Llc |
AS195-5-12 | Avibank Mfg., Inc. |
CA4520-5-12 | Arconic Global Fasteners & Rings, |
Stock Check
![](/public/images/partscage_shelf3.png)