NSN 5305-00-501-9993
High Torque Screw
Between 1.890 inches and 1.920 inches fastener length, flat countersunk head style, between 0.266 inches and 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number LS15237-3-25 for national stock number 5305005019993.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-501-9993.
-
MPN or Model
LS15237-3-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 1.890 inches and 1.920 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049rjgcams 6322 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-047-2434 MPN HT8043-3-1Close Tolerance Screw
- 5305-00-182-9337 MPN CVC241A4-8Machine Screw
- 5305-01-007-7064 MPN HT4041-3-2-5Close Tolerance Screw
- 5305-01-045-3023 MPN HT4016-3-7YSocket Head Cap Screw
- 5305-01-046-5451 MPN HT4011-6-7Shoulder Screw
- 5305-01-268-0910 MPN BACB30LU4D15Close Tolerance Screw
- 5305-01-330-7092 MPN SC3102-3-15AClose Tolerance Screw
- 5305-01-334-1051 MPN SC5053-3-2Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-501-9993 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237-3-25 | Lockheed Martin Corporation |
LS15237-3-25 | Arconic Global Fasteners & Rings, |
LS15237-3-25 | Huck International, Inc. |
LS15237-3-25 | Sps Technologies, Llc |
LS15237-3-25 | Hi-shear Corporation |
LS15237-3-25 | Lisi Aerospace Canada Corp |