NSN 5305-00-505-3291
High Torque Screw
Between 0.922 inches and 0.952 inches fastener length, flat countersunk head style, between 0.429 inches and 0.477 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number LS15237-5-9 for national stock number 5305005053291.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-3291.
-
MPN or Model
LS15237-5-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 0.922 inches and 0.952 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.477 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-369-1700 MPN HT1029A4D15PClose Tolerance Screw
- 5305-00-516-6214 MPN HT4024L5-17-1Close Tolerance Screw
- 5305-01-004-9528 MPN HT4027-3-3Close Tolerance Screw
- 5305-01-058-1234 MPN VT1694F3-2Close Tolerance Screw
- 5305-01-209-9325 MPN SCI785T-04-06Machine Screw
- 5305-01-396-8062 MPN 3M707-3-11-5Close Tolerance Screw
- 5305-01-445-6449 MPN TX1024D3-2-5AClose Tolerance Screw
- 5306-00-163-9929 MPN 51B464-4A11SShear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-3291 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237-5-9 | Lockheed Martin Corporation |
LS15237-5-9 | Arconic Global Fasteners & Rings, |
LS15237-5-9 | Sps Technologies, Llc |
LS15237-9 | Alcoa Global Fasteners, Inc. |
LS15237-5-9 | Sps Technologies, Llc |