NSN 5305-00-514-7569
High Torque Screw
Between 0.814 inches and 0.844 inches fastener length, flat countersunk head style, between 0.510 inches and 0.564 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT8167-6-7 for national stock number 5305005147569.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-514-7569.
-
MPN or Model
HT8167-6-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 0.814 inches and 0.844 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.510 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.428 inches and 0.438 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response or ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-419-6584 MPN 106334-4-12Close Tolerance Screw
- 5305-00-574-0248 MPN 76122-4-8Machine Screw
- 5305-00-680-6395 MPN NAS1203-5Close Tolerance Screw
- 5305-00-834-0129 MPN 53B333-3Machine Screw
- 5305-01-054-6237 MPN 121754-6-21Close Tolerance Screw
- 5305-01-129-6936 MPN HT4025L7-22Close Tolerance Screw
- 5305-01-155-2568 MPN NAS1191-04P5LHSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-514-7569 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT8167-6-7 | Alcoa Global Fasteners, Inc. |
HT8167-6-7 | Sps Technologies, Llc |