NSN 5305-00-516-5997
High Torque Screw
Between 1.126 inches and 1.156 inches fastener length, flat countersunk head style, between 0.510 inches and 0.564 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT8167-6-12 for national stock number 5305005165997.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-516-5997.
-
MPN or Model
HT8167-6-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.391 inches -
Fastener Length
Between 1.126 inches and 1.156 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.510 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response or ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-007-5652 MPN LTH300Radiant Heater
- 5305-00-079-1728 MPN 3MFR1505-8Machine Screw
- 5305-00-150-0846 MPN NAS1189E02T14LSocket Head Cap Screw
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-00-505-3048 MPN LS15234C06-13Close Tolerance Screw
- 5305-00-680-5468 MPN HT4M-25Close Tolerance Screw
- 5305-00-763-4984 MPN NAS1190E3T5LSocket Head Cap Screw
- 5305-00-803-0416 MPN HT3C3Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-516-5997 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT8167-6-12 | Alcoa Global Fasteners, Inc. |
HT8167-6-12 | Hi-shear Corporation |
HT8167-6-12 | Hi-shear Corporation |