NSN 5305-00-518-5304
High Torque Screw
Between 2.370 inches and 2.417 inches fastener length, flat countersunk head style, between 0.797 inches and 0.842 inches head diameter, grip diameter: between 0.5605 inches and 0.5615 inches .
Manufacturer part number HT9C30D for national stock number 5305005185304.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-518-5304.
-
MPN or Model
HT9C30D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.485 inches and 0.552 inches -
Fastener Length
Between 2.370 inches and 2.417 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.797 inches and 0.842 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Shank Unthreaded Hole Diameter
0.140 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.562 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
18 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.246 inches first hole and 2.293 inches first hole -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 431 -
Material Specification
Aisi assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Passivate 258, fscm 73197 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-8299 MPN 51B223-15Close Tolerance Screw
- 5305-00-146-7190 MPN HR101V-5-7Close Tolerance Screw
- 5305-00-338-2929 MPN HT184-3-11Close Tolerance Screw
- 5305-00-435-9102 MPN NAS1191E4T6Socket Head Cap Screw
- 5305-00-817-4592 MPN NAS1101-06-6Machine Screw
- 5305-00-841-2291 MPN HT195-6-27Close Tolerance Screw
- 5305-00-864-8956 MPN NAS1203-31Close Tolerance Screw
- 5305-00-952-0970 MPN NAS1203-14WClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-518-5304 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT9C30D | Hi-shear Corporation |
HT9C30D | Hi-shear Corporation |