NSN 5305-00-529-9209
High Torque Screw
Between 1.063 inches and 1.110 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number GB510BA6-7AR for national stock number 5305005299209.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-529-9209.
-
MPN or Model
GB510BA6-7AR
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.682 inches -
Fastener Length
Between 1.063 inches and 1.110 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.138 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
40 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 431 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-001-7404 MPN GS836CD7EToggle Switch
- 1680-00-004-9750 MPN A51M20017-3Gear Rack Assembly
- 1560-00-006-8051 MPN A51B20173-17Fairing Cover Assembly
- 5935-00-055-7082 MPN GA800DH1Connector Adapter
- 4920-00-070-1766 MPN 123SCSEF105-1Pump
- 1560-00-091-3198 MPN 89144-11Oil System Adapter Assembly
- 1680-00-098-0992 MPN 89310-7Remote Control Lever
- 5935-00-111-4792 MPN GC801CP1Electrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-529-9209 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510BA6-7AR | Northrop Grumman Systems Corporation |
HT6A7 | Hi-shear Corporation |
HT6A7AR | Hi-shear Corporation |
HT6A7AR | Lisi Aerospace Canada Corp |