NSN 5305-00-550-0516
High Torque Screw
Between 1.577 inches and 1.624 inches fastener length, flat countersunk head style, between 1.007 inches and 1.017 inches head diameter, grip diameter: between 0.4986 inches and 0.4991 inches .
Manufacturer part number NAS338PA14 for national stock number 5305005500516.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-550-0516.
-
MPN or Model
NAS338PA14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.756 inches and 0.823 inches -
Fastener Length
Between 1.577 inches and 1.624 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.007 inches and 1.017 inches -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Thread Series Designator
Unf -
Specification Data
80205-nas338 professional/industrial association standard
More from these suppliers
- 5935-00-137-0932 MPN NAS1666-18Electrical Connector Cable Clamp
- 5940-01-432-3257 MPN NAS1063A10-105AYTerminal Board Marker Strip
- 5305-00-001-9768 MPN NAS1741-3R20Socket Head Cap Screw
- 5305-00-003-8160 MPN NAS1351-5-28PSocket Head Cap Screw
- 5305-00-007-1565 MPN NAS1100C06-8PMachine Screw
- 5305-00-032-3692 MPN NAS1352-06LL10PSocket Head Cap Screw
- 5305-00-038-8989 MPN NAS1352-4-20PSocket Head Cap Screw
- 5305-00-052-6913 MPN MS24629-33Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-550-0516 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS338PA14 | National Aerospace Standards |