NSN 5305-00-558-2774
High Torque Screw
Between 1.266 inches and 1.312 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number NAS333CP12 for national stock number 5305005582774.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-558-2774.
-
MPN or Model
NAS333CP12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.344 inches -
Fastener Length
Between 1.266 inches and 1.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.142 inches first hole -
Surface Finish
32.0 microinches top of head -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unf -
Specification Data
80205-nas333 professional/industrial association standard
More from these suppliers
- 5935-01-591-8613 MPN AS85049/38-13WElectrical Connector Backshell
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5305-00-057-0538 MPN NASM51958Machine Screw
- 5305-00-058-9391 MPN MS51977-76Setscrew
- 5305-00-104-5075 MPN NAS1352-5LE52PSocket Head Cap Screw
- 5305-00-113-3733 MPN NAS560CK3-7Machine Screw
- 5305-00-140-2081 MPN NAS1096-1-58Machine Screw
- 5305-00-143-2721 MPN NAS1506-25Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-558-2774 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS333CP12 | National Aerospace Standards |